Please read this before place an order
You need to connect a resistor 1K(1000ohm) 1/4Watt or 1.5K(1500ohm) 1/8 Wattother valuein series when you use the function wires with LED to limit the current of led.
(Caution) DCC Voltages. Please make sure your DCC Voltages are less than 16V. We
recommend track voltage at 12V. Read below to understand all about dcc voltage. Over
Voltage may make the decoder irreparable harm. We do not accept dispute if your voltage is over 16V and burn the decoders. If your track voltage can not lower to 16V, please not order our decoders.
860021 do not support stay alive kits. If you need stay alive function, please order 870021.
2 Amp peak power, 1A continuous in all, Each Functions maximum 100mA.
Good for HO & N scale
NEM652 DCC LOCO DECODER FOR HO & N SCALE MODEL TRAIN
There are no reviews yet.