Please read this before place an order
You need to connect a resistor 1K(1000ohm) 1/4Watt or 1.5K(1500ohm) 1/8 Wattother valuein series when you use the function wires with LED to limit the current of led.
(Caution) DCC Voltages. Please make sure your DCC Voltages are less than 16V. We
recommend track voltage at 12V. Read below to understand all about dcc voltage. Over
Voltage may make the decoder irreparable harm. We do not accept dispute if your voltage is over 16V and burn the decoders. If your track voltage can not lower to 16V, please not order our decoders.
F3, F4 Function Warning
All function of this decoder is full voltage output now. You can directly use it to drive LED now. Please also connect a 1K or bigger resistor in series to limit the LED current.
2 Amp peak power, 1A continuous in all, Each Functions maximum 100mA.
Loco Scale: Good for HO & N scale
Model and Order Number: 860019
DCC Decoders for loco with 21MTC interface